Appliance Repair Churchill

Call Us Today:
705-999-8025

Refrigerator Repair Faults

Fridge is not cold enough: One of the most common issues with refrigerators is when they fail to maintain the proper temperature. This can result in food spoiling prematurely and potentially causing foodborne illnesses.

Fridge water dispenser is not working: A malfunctioning water dispenser can be frustrating, especially when you rely on it for cold, refreshing water and ice cubes. This issue may be caused by a faulty water inlet valve, clogged water filter, or damaged dispenser components.

Fridge ice maker is not working: If your refrigerator’s ice maker has stopped producing ice, it could be due to various reasons, such as a clogged water line, malfunctioning ice maker assembly, or improper temperature settings.

Fridge not defrosting: When a refrigerator fails to defrost properly, it can lead to ice buildup on the evaporator coils, obstructing airflow and causing the fridge to warm up. This issue may be caused by a defective defrost heater, thermostat, or control board.

Fridge compressor is hot: A hot compressor in your refrigerator can indicate an underlying issue, such as a malfunctioning condenser fan motor, dirty condenser coils, or a refrigerant leak. It’s essential to address this problem promptly to prevent further damage to the compressor.

Fridge defrost drain problems: If the defrost drain in your refrigerator becomes clogged or blocked, it can lead to water pooling at the bottom of the fridge or leaking onto the floor. This issue may require clearing the drain line or replacing the drain assembly.

Fridge leaking water: A refrigerator that leaks water can cause damage to your kitchen floor and surrounding areas. This issue may be due to a clogged defrost drain, cracked water supply line, or damaged water inlet valve.

Fridge freezing food: When a refrigerator freezes food unexpectedly, it can ruin groceries and make meal planning challenging. This issue may be caused by a defective temperature control thermostat, damaged door gasket, or faulty damper control assembly.

Dishwasher Repair Faults:

• Dishwasher not cleaning dishes properly: Are your dishes coming out of the dishwasher still dirty? This could indicate issues with water pressure, clogged spray arms, or a malfunctioning detergent dispenser.
• Dishwasher not draining: If you notice water pooling at the bottom of your dishwasher after a cycle, there may be a clog in the drain hose or pump, a faulty drain pump, or a problem with the dishwasher’s control board.
• Dishwasher door latch problems: Difficulty latching or closing the dishwasher door can prevent it from starting or completing a cycle. This issue could stem from a faulty door latch assembly or misaligned door hinges.
• Dishwasher leaking: Leaks around the dishwasher door, underneath the unit, or from the water supply line can indicate problems with the door gasket, pump seals, or inlet valve.
• Strange odors coming from the dishwasher: Foul or unusual smells emanating from the dishwasher may be caused by food debris trapped in the filter or spray arms, mold or mildew growth, or a buildup of detergent residue.
• Dishwasher not filling with water: A dishwasher that fails to fill with water may have a clogged water inlet valve, faulty float switch, or issues with the water supply line.
• Dishwasher not starting: If your dishwasher won’t start at all, it could be due to a malfunctioning door switch, control panel, or timer. Electrical issues or power supply problems may also be to blame.
• Dishwasher making unusual noises: Grinding, buzzing, or clanking noises during the dishwasher’s operation could indicate a range of issues, including worn-out bearings, a malfunctioning motor, or debris caught in the pump or spray arms.
• Dishes come out still wet: If your dishwasher isn’t drying dishes properly, it may be due to a faulty heating element, malfunctioning thermostat, or issues with the rinse aid dispenser.
• Dishwasher leaving residue on dishes: Residue or film left on dishes after a wash cycle can be caused by hard water deposits, improper loading of dishes, or a malfunctioning spray arm or filter.

Oven Repair Faults:

• Oven not heating up: If your oven fails to heat up to the desired temperature, it could be due to a faulty heating element, igniter, thermostat, or electronic control board.
• Uneven cooking in the oven: Uneven cooking, where food is cooked unevenly or one side is more cooked than the other, may indicate issues with temperature calibration, a malfunctioning heating element, or improper airflow within the oven cavity.
• Oven door not closing properly: A loose or misaligned oven door can lead to heat loss and uneven cooking. This issue may be caused by worn-out hinges, a damaged door seal, or a faulty door latch.
• Oven producing strange odors: Unusual smells emanating from the oven during use could be a sign of food spillage or residue burning on the oven walls, a malfunctioning heating element, or internal wiring issues.
• Oven light not working: If the oven light fails to turn on when the oven is in use, it may be due to a burnt-out light bulb, faulty light socket, or issues with the oven’s electrical wiring.
• Oven self-clean feature not functioning: Problems with the oven’s self-cleaning function, such as failure to start the cleaning cycle or incomplete cleaning, may be caused by issues with the door latch assembly, temperature sensor, or control board.
• Oven temperature control issues: Inaccurate temperature settings or fluctuations in oven temperature can lead to uneven cooking results. This issue may stem from a faulty thermostat, temperature sensor, or control panel.
• Oven sparking: Sparks or electrical arcing inside the oven cavity can indicate a serious issue with the electrical components, such as a short circuit or damaged wiring. It’s essential to address this issue promptly to avoid the risk of fire.
• Oven displaying error codes: Error codes appearing on the oven’s display panel may indicate specific malfunctions or system failures. These codes can help diagnose and troubleshoot issues with the oven’s electronic control board, sensors, or other components.
• Oven timer not working: If the oven timer fails to function correctly, it may be due to issues with the timer knob, control panel, or electronic clock/timer assembly. This problem can affect the oven’s ability to accurately time cooking processes.
  

  Stove Repair Faults:

  • Burners not heating up: If the burners on your stove fail to heat up properly, it could be due to issues with the heating elements, burner receptacles, or faulty burner switches.
  • Stove not igniting: Difficulty igniting the burners or oven pilot lights can be caused by a variety of issues, including a defective ignition module, spark electrode, or gas supply problems.
  • Stove burner flame uneven: Uneven flames on the stove burners may indicate clogged burner ports, improper gas pressure, or issues with the burner caps or bases.
  • Stove knobs not turning properly: Difficulty turning the knobs to control the stove burners or oven functions can be caused by worn-out knobs, damaged control valves, or misaligned burner assemblies.
  • Stove indicator lights not working: Malfunctioning indicator lights on the stove’s control panel may indicate issues with the indicator bulbs, wiring connections, or control board.
  • Stove element not working: If one or more elements on your electric stove fail to heat up, it could be due to a faulty heating element, burner switch, or wiring connection.
  • Stove producing unusual smells: Strange or unusual odors emanating from the stove during operation may indicate issues with gas leaks, food spillage on the burner surfaces, or electrical problems.
  • Stove overheating: Excessive heat radiating from the stove or control panel can indicate issues with the temperature sensors, control board, or improper ventilation around the stove.
  • Stove door not closing properly: A stove door that doesn’t close or seal properly can lead to heat loss and inefficient cooking. This issue may be caused by worn-out hinges, damaged door seals, or misaligned door assemblies.
  • Stove self-cleaning function not working: Problems with the stove’s self-cleaning feature, such as failure to initiate the cleaning cycle or incomplete cleaning results, may be due to issues with the door latch mechanism, temperature sensor, or control panel.
    

    Washer Repair Faults:
    
    

    • Washer not draining: If water remains in the washer after the cycle is complete, it may indicate a clogged drain hose, faulty drain pump, or malfunctioning drain valve.
    • Washer not spinning: A washer that fails to spin properly may have issues with the drive belt, motor coupling, or lid switch. This can result in wet clothes at the end of the cycle.
    • Washer leaking water: Leaks around the washer can be caused by damaged door seals, cracked hoses, or loose connections to the water inlet valves or drain pump.
    • Washer not filling with water: If the washer does not fill with water during the wash cycle, it could be due to a clogged inlet valve, faulty water level switch, or issues with the water supply.
    • Washer shaking or vibrating excessively: Excessive vibration during the spin cycle may be caused by an unbalanced load, worn suspension springs, or leveling issues with the washer.
    • Washer producing strange noises: Unusual noises such as banging, grinding, or squealing during operation may indicate problems with the motor, bearings, or drive belt.
    • Washer door or lid won’t lock: If the washer door or lid fails to lock properly, it may prevent the cycle from starting. This issue could be due to a faulty door lock assembly or misaligned door strike.
    • Washer displaying error codes: Error codes appearing on the washer’s display panel can help diagnose specific malfunctions, such as issues with the motor, control board, or water level sensor.
    • Clothes coming out still dirty: If clothes remain dirty after a wash cycle, it could be due to insufficient detergent, improper loading of the washer, or issues with the agitator or wash cycle settings.
    • Washer not completing cycles: If the washer stops mid-cycle or fails to complete the entire wash cycle, it may indicate problems with the timer, control board, or motor.
      

      Dryer Repair Faults:
      
      

      • Dryer not heating up: If your dryer fails to produce heat during the drying cycle, it may be due to a faulty heating element, thermal fuse, or thermostat.
      • Dryer not tumbling: A dryer that doesn’t tumble or rotate properly may have issues with the drive belt, motor, or idler pulley.
      • Dryer taking too long to dry clothes: If your dryer requires multiple cycles to dry clothes thoroughly, it could indicate a clogged vent hose, lint trap, or faulty heating element.
      • Dryer making loud noises: Unusual noises such as grinding, squeaking, or thumping sounds during operation may indicate problems with the drum rollers, bearings, or blower wheel.
      • Dryer not turning on: If your dryer fails to start when you press the power button, it could be due to issues with the door switch, thermal fuse, or timer.
      • Dryer overheating: Excessive heat inside the dryer drum or cabinet can indicate issues with the heating element, thermostat, or ventilation system. This can pose a fire hazard and should be addressed promptly.
      • Dryer producing strange odors: Foul or burning smells emanating from the dryer during operation may be caused by lint buildup in the exhaust vent, overheating components, or foreign objects caught in the drum.
      • Dryer displaying error codes: Error codes appearing on the dryer’s display panel can help diagnose specific malfunctions, such as problems with the control board, sensors, or electrical components.
      • Dryer door not closing properly: A loose or misaligned dryer door can lead to heat loss and inefficient drying. This issue may be caused by worn-out door seals, damaged hinges, or a faulty door latch.
      • Dryer not venting properly: If your dryer fails to expel hot, moist air properly, it could result in poor drying performance, overheating, or even a fire hazard. This may be caused by a clogged vent hose, lint trap, or ventilation duct.
        

        Why Choose ARS Appliances Repair Service in Churchill, Ontario?

        • Expert Technicians: Our team comprises highly skilled technicians with years of experience in diagnosing and repairing a wide range of appliance issues. With their expertise, you can trust that your appliances are in capable hands.
        • Prompt and Reliable Service: We understand the inconvenience of dealing with malfunctioning appliances, which is why we offer fast and reliable service. Our technicians arrive promptly at your doorstep, equipped with the tools and knowledge needed to get your appliances back up and running quickly.
        • Affordable Pricing: We believe that quality appliance repair shouldn’t break the bank. That’s why we offer transparent pricing and upfront quotes for all our repair services. You can rest assured knowing that you’re getting the best value for your money with ARS.
        • Excellent Customer Service: At ARS, customer satisfaction is our top priority. From the moment you reach out to us for assistance to the completion of the repair service, we strive to provide exceptional customer service every step of the way. Our friendly and knowledgeable staff are always ready to assist you with any questions or concerns you may have.
        • Genuine Parts: We understand the importance of using genuine parts for appliance repairs. That’s why we source high-quality, manufacturer-approved parts to ensure the longevity and performance of your appliances.
        • Locally Owned and Operated: As a locally owned and operated business, we are deeply rooted in the Churchill community. We take pride in serving our neighbors and contributing to the well-being of our community through our reliable appliance repair services.
        • Customer Convenience: We value your time and convenience, which is why we offer flexible appointment scheduling to accommodate your busy schedule. Whether you need a same-day repair or prefer to schedule an appointment at your convenience, we’re here to make the process as hassle-free as possible.
        • Satisfaction Guarantee: Your satisfaction is guaranteed when you choose ARS Appliances Repair Service. We stand behind the quality of our workmanship and are committed to ensuring that you are completely satisfied with the results of our repair services. If you’re not happy, we’ll make it right.

Contact Our Appliance Repair Churchill Technicians Today!

Read our reviews on HomeStars, like us on Facebook and don’t forget to share this page, just click on one of the links below.
👇